Rapidstick 8574 can be used on close fitting, rigid machined surfaces such as cast-iron components, gearboxes, and engine casings. It has excellent oil resistance, and high chemical tolerance, and is particularly suited for screen-printing complex gasket designs, and formed-in-place gaskets. 8574 offers with no threat of shrinking, creeping, or breaking. It provides low pressure resistance immediately after application, and will completely fill surface scratches and voids, creating an enhanced seal over irregular surfaces for the life of the connection. Note: If the material is an inactive metal, or the cure speed is too slow, it is recommended to apply Rapidstick 8-3471 Anaerobic Adhesives Primer. Specifications (refer to TDS for full details) Colour: Orange Viscosity: 30,000 100,000 Thixotropic (Gel) Cure Speed: Fast Strength: Medium Gap Filling: Up to .20mm Temperature Range (deg celcius): -54 to 148
Rapidstick 8574 can be used on close fitting, rigid machined surfaces such as cast-iron components, gearboxes, and engine casings. It has excellent oil resistance, and high chemical tolerance, and is particularly suited for screen-printing complex gasket designs, and formed-in-place gaskets. 8574 offers with no threat of shrinking, creeping, or breaking. It provides low pressure resistance immediately after application, and will completely fill surface scratches and voids, creating an enhanced seal over irregular surfaces for the life of the connection. Note: If the material is an inactive metal, or the cure speed is too slow, it is recommended to apply Rapidstick 8-3471 Anaerobic Adhesives Primer. Specifications (refer to TDS for full details) Colour: Orange Viscosity: 30,000 100,000 Thixotropic (Gel) Cure Speed: Fast Strength: Medium Gap Filling: Up to .20mm Temperature Range (deg celcius): -54 to 148