Carbon Conductive Grease is an excellent low cost mechanical and thermal conductor for irregular or pitted surfaces and loose or vibrating parts. It is designed to prevent closed switches from corrosion, prevent the formation of oxides, sulphides, and other corrosion deposits on copper and aluminium surfaces, improve the connection between worn contacts and non-moving mating surfaces, and reduce arcing hot spots. R006 relies on a proprietary carbon filler rather than traditional metallic particles for electrical conductivity. It is typically used a ground and is particularly useful when trying to drain static electricity away from moving objects, from low micro-power electronics through to high voltage switchgear. Carbon Conductive Grease is non-hardening and non-melting with a high resistance to water washout, and offers a board service temperature range with continuing lubrication, and low bleed and evaporation. It is ideal for ground connections, rotating connections, rotary switches, variable capacitors, roller inductors, roller bearings, slip rings, slide connectors, and potentiometers. Specifications (refer to TDS for full details) Colour: Black Odour: Odourless Worked Penetration, 60 Strokes, ? Scale (ASTM D1403): 269 Volume Resistivity (?v) (Mil-Std-883J Method 5.11.6): 114 ?.cm Volume Conductivity (?v) (Mil-Std-883J Method 5.11.6): 0.009 S/cm Dropping Point (ASTM D2265): > 304deg celcius Service Temperature: -50deg celcius to +200deg celcius
Carbon Conductive Grease is an excellent low cost mechanical and thermal conductor for irregular or pitted surfaces and loose or vibrating parts. It is designed to prevent closed switches from corrosion, prevent the formation of oxides, sulphides, and other corrosion deposits on copper and aluminium surfaces, improve the connection between worn contacts and non-moving mating surfaces, and reduce arcing hot spots. R006 relies on a proprietary carbon filler rather than traditional metallic particles for electrical conductivity. It is typically used a ground and is particularly useful when trying to drain static electricity away from moving objects, from low micro-power electronics through to high voltage switchgear. Carbon Conductive Grease is non-hardening and non-melting with a high resistance to water washout, and offers a board service temperature range with continuing lubrication, and low bleed and evaporation. It is ideal for ground connections, rotating connections, rotary switches, variable capacitors, roller inductors, roller bearings, slip rings, slide connectors, and potentiometers. Specifications (refer to TDS for full details) Colour: Black Odour: Odourless Worked Penetration, 60 Strokes, ? Scale (ASTM D1403): 269 Volume Resistivity (?v) (Mil-Std-883J Method 5.11.6): 114 ?.cm Volume Conductivity (?v) (Mil-Std-883J Method 5.11.6): 0.009 S/cm Dropping Point (ASTM D2265): > 304deg celcius Service Temperature: -50deg celcius to +200deg celcius
Carbon Conductive Grease is an excellent low cost mechanical and thermal conductor for irregular or pitted surfaces and loose or vibrating parts. It is designed to prevent closed switches from corrosion, prevent the formation of oxides, sulphides, and other corrosion deposits on copper and aluminium surfaces, improve the connection between worn contacts and non-moving mating surfaces, and reduce arcing hot spots. R006 relies on a proprietary carbon filler rather than traditional metallic particles for electrical conductivity. It is typically used a ground and is particularly useful when trying to drain static electricity away from moving objects, from low micro-power electronics through to high voltage switchgear. Carbon Conductive Grease is non-hardening and non-melting with a high resistance to water washout, and offers a board service temperature range with continuing lubrication, and low bleed and evaporation. It is ideal for ground connections, rotating connections, rotary switches, variable capacitors, roller inductors, roller bearings, slip rings, slide connectors, and potentiometers. Specifications (refer to TDS for full details) Colour: Black Odour: Odourless Worked Penetration, 60 Strokes, ? Scale (ASTM D1403): 269 Volume Resistivity (?v) (Mil-Std-883J Method 5.11.6): 114 ?.cm Volume Conductivity (?v) (Mil-Std-883J Method 5.11.6): 0.009 S/cm Dropping Point (ASTM D2265): > 304deg celcius Service Temperature: -50deg celcius to +200deg celcius
Carbon Conductive Grease is an excellent low cost mechanical and thermal conductor for irregular or pitted surfaces and loose or vibrating parts. It is designed to prevent closed switches from corrosion, prevent the formation of oxides, sulphides, and other corrosion deposits on copper and aluminium surfaces, improve the connection between worn contacts and non-moving mating surfaces, and reduce arcing hot spots. R006 relies on a proprietary carbon filler rather than traditional metallic particles for electrical conductivity. It is typically used a ground and is particularly useful when trying to drain static electricity away from moving objects, from low micro-power electronics through to high voltage switchgear. Carbon Conductive Grease is non-hardening and non-melting with a high resistance to water washout, and offers a board service temperature range with continuing lubrication, and low bleed and evaporation. It is ideal for ground connections, rotating connections, rotary switches, variable capacitors, roller inductors, roller bearings, slip rings, slide connectors, and potentiometers. Specifications (refer to TDS for full details) Colour: Black Odour: Odourless Worked Penetration, 60 Strokes, ? Scale (ASTM D1403): 269 Volume Resistivity (?v) (Mil-Std-883J Method 5.11.6): 114 ?.cm Volume Conductivity (?v) (Mil-Std-883J Method 5.11.6): 0.009 S/cm Dropping Point (ASTM D2265): > 304deg celcius Service Temperature: -50deg celcius to +200deg celcius
Carbon Conductive Grease is an excellent low cost mechanical and thermal conductor for irregular or pitted surfaces and loose or vibrating parts. It is designed to prevent closed switches from corrosion, prevent the formation of oxides, sulphides, and other corrosion deposits on copper and aluminium surfaces, improve the connection between worn contacts and non-moving mating surfaces, and reduce arcing hot spots. R006 relies on a proprietary carbon filler rather than traditional metallic particles for electrical conductivity. It is typically used a ground and is particularly useful when trying to drain static electricity away from moving objects, from low micro-power electronics through to high voltage switchgear. Carbon Conductive Grease is non-hardening and non-melting with a high resistance to water washout, and offers a board service temperature range with continuing lubrication, and low bleed and evaporation. It is ideal for ground connections, rotating connections, rotary switches, variable capacitors, roller inductors, roller bearings, slip rings, slide connectors, and potentiometers. Specifications (refer to TDS for full details) Colour: Black Odour: Odourless Worked Penetration, 60 Strokes, ? Scale (ASTM D1403): 269 Volume Resistivity (?v) (Mil-Std-883J Method 5.11.6): 114 ?.cm Volume Conductivity (?v) (Mil-Std-883J Method 5.11.6): 0.009 S/cm Dropping Point (ASTM D2265): > 304deg celcius Service Temperature: -50deg celcius to +200deg celcius
Carbon Conductive Grease is an excellent low cost mechanical and thermal conductor for irregular or pitted surfaces and loose or vibrating parts. It is designed to prevent closed switches from corrosion, prevent the formation of oxides, sulphides, and other corrosion deposits on copper and aluminium surfaces, improve the connection between worn contacts and non-moving mating surfaces, and reduce arcing hot spots. R006 relies on a proprietary carbon filler rather than traditional metallic particles for electrical conductivity. It is typically used a ground and is particularly useful when trying to drain static electricity away from moving objects, from low micro-power electronics through to high voltage switchgear. Carbon Conductive Grease is non-hardening and non-melting with a high resistance to water washout, and offers a board service temperature range with continuing lubrication, and low bleed and evaporation. It is ideal for ground connections, rotating connections, rotary switches, variable capacitors, roller inductors, roller bearings, slip rings, slide connectors, and potentiometers. Specifications (refer to TDS for full details) Colour: Black Odour: Odourless Worked Penetration, 60 Strokes, ? Scale (ASTM D1403): 269 Volume Resistivity (?v) (Mil-Std-883J Method 5.11.6): 114 ?.cm Volume Conductivity (?v) (Mil-Std-883J Method 5.11.6): 0.009 S/cm Dropping Point (ASTM D2265): > 304deg celcius Service Temperature: -50deg celcius to +200deg celcius
